About KVAR® KEC

As Seen On Sustainable Planet

The Problem

Up to 25% of the billable electricity consumed in homes and businesses is non-productive and unusable. Most AC motors operate at 80% efficiency under a full load...the efficiency drops dramatically at lower loads.

This non-productive energy wastes money and also shortens the life of inductive equipment such as motors, HVAC equipment, pumps and major appliances.

"Over $16 billion dollars of electricity is unusable energy, but billable in the U.S."
- U.S. Dept. of Energy

"The adequacy of North America's electricity system will decline unless changes are made soon...demand for electricity is expected to increase over the next ten years by 19 percent in the U.S., but confirmed power capacity will increase by only 6 percent."
- North American Electric Reliability Council (NERC)

The Solution

KVAR® KEC fine tunes electrical systems to reduce non-productive and wasted electricity, giving you cost-effective energy.

How KVAR® KEC Works:

KVAR® has patented an apparatus and methodology for determining, to an exact science, the amount of capacitance that is needed to optimize inductive motors to unity for maximum savings.
KVAR® KEC fine tunes the electrical system from the inductive equipment back through the utility company's KVA electric meter, kilowatt hour meter (kWh) or demand meter. This fine tuning slows down the operation and therefore reduces electrical consumption.
The KVAR® KEC stores the reactive power to create the electromagnetic field (EMF) around the inductive windings of a motor.
As motors operate, reactive power is "pulled" ans "pushed" to and from the KVAR®KEC by the motor at 60 cycles/second.
The KVAR® KEC stores and releases what the motors need to function more efficiently.
This unique approach serves to reduce the heat generated on the lines and therefore also reduces the strain placed on all the electrical components.
Electricity, that would normally by pushed back through the power distribution lines, is reclaimed and recycled by the KVAR® KEC.
The KVAR® KEC reclaims, stores, recycles and supplies power to all inductive loads.

• Find Out More

Discover the savings that thousands of satisfied customers are enjoying. Enery efficiency is a commitment worth making, especially with today's global climate change. Become more earth friendly, while reaping the financial savings from using the KVAR® KEC!

KVAR® KEC Installation:

Installation is quick and the savings are immediate.

KVAR® KEC panel mounted system is attached to the top breaker on a 100, 200 or 400 amp single or three phase service panel. By installing KVAR® KEC in this location, you are optimizing both sides of the busbar in your panel and insuring whole facility surge protection. KVAR® KEC panel system can be installed outdoors or indoors, at the main breaker panel or a subpanel.

For larger three phase motors, the preferred location of KVAR® KEC is at the motors disconnect, which are installed after trained electricians have performed an individual sizing of the respective motors. This creates the largest savings and quickest ROI.

Qualified electricians should perform all work. Please contact us today to get your KVAR® KEC now!